
20 Amp Fuse
Call Only
This fuse is located inside of the inline fuse holder and can be found between the terminal block and the power switch within the electrical box on the waste oil burner.

3/4 Rope Gasket
Call Only
3/4″ rope Gasket. This item is $5.25 per foot. Please call for details. Located on the waste oil burner side swing door and the clean out side swing door opposite of the waste oil burner on all OMNI and Econo Heater waste oil heaters.

6″ Class A Waste Oil Heater Chimney Kit
Call Only
6" Class A waste oil heater chimney kit for venting. The EH-75 and OWH-75 are the only waste oil heating units that use the 6". All other sizes and models use the 8" class a chimney kit. This is a through the roof chimney kit. Call for details.

8″ Class A Waste Oil Heater Chimney Kit
Call Only
8" Class A waste oil heater chimney kit for venting. The EH-75 and OWH-75 are the only waste oil heating units that use the 6". All other sizes and models use the 8" class a chimney kit. This is a through the roof chimney kit. Call for details.

90 Degree Fitting
Call Only
The 90 degree fitting is used to connect the fuel line from the valve solenoid to the fuel pre-heater block on the waste oil burner.

Air Band
Call Only
The air band is used on both the OMNI compressed air burner system and the Econo Heater pressure burner system. Located on the waste oil burner housing.

Air Compressor Carbon Plate
Call Only
The carbon plate is located in the air compressor motor behind the removable plate. Carbon plate is accessed the same way as the vanes.

Air Compressor Motor (OMNI line only)
Call Only
The motor air compressor is a standard build on all OMNI waste oil heaters. Located on the bottom of the waste oil burner assembly.

Air Compressor Squirell Cage
Call Only
This squirrel cage fan is located inside of the waste oil burner housing between the air-band and the air compressor motor.

Air Compressor Vanes
Call Only
Vanes are located inside of the air compressor motor on the OMNI waste oil burner.

Air Filter Canister
Call Only
The air filter canister is located on the air compressor motor on the OMNI waste oil burner.

Air Filter Replacement
Call Only
Replacement filter for the air filter canister located on the air compressor motor on the OMNI waste oil burner.

Air Nozzle (OMNI line only)
Call Only
This nozzle is for the OMNI line of waste oil heaters. Located at the tip of the burner. Easily accessible without removing any other parts.

Amber Light
Call Only
Located on the front of the electrical box on the waste oil burner assembly. Compatible with both OMNI and the Econo Heater line of waste oil equipment.

Braided Door Flange Gasket
Call Only
Product is $7.62 per foot. Call to place order.

Clear Hose (Oil & Air Lines)
Call Only
The clear plastic hose/line is for both the air line and fuel line. The air line goes from the compressor into the fuel pre-heater block and the fuel line goes from the solenoid into the fuel pre-heater block.

Econo Heater EH-075 Waste Oil Heater
Call Only
This 75,000 BTU Econo Heater is the smallest waste oil heater on the market. Capable of heating up-to 2500 sq. ft. with a self contained waste oil burner, on-board fuel pump and requires absolutely no air. It is a very simple pressure system like other regular fuel oil burners but allows you to burn waste oil's and fuel oil with no manual adjustments needed.

Econo Heater EH-150 Waste Oil Heater
Call Only
The EH-150 is perfect for a smaller garage or shop and is able to effectively burn nearly any waste oil's to help eliminate almost all heating costs. With the self-contained waste oil burner and on-board fuel pump, along with the easy access to the fire chamber and heat exchanger, maintenance becomes very quick and easy.

Econo Heater EH-250 Waste Oil Heater
Call Only
The EH-250 waste oil heater is perfect for a mid-size garage or shop and is able to effectively burn nearly any waste oil's to help eliminate almost all heating costs. With the self-contained waste oil burner, on-board fuel pump and the easy access to the fire chamber and heat exchanger, maintenance becomes very quick and easy.

Econo Heater EH-350 Waste Oil Heater
Call Only
The EH-350 waste oil heater is perfect for a larger garage or shop and is able to effectively burn nearly any waste oil's to help eliminate almost all heating costs. With the self-contained waste oil burner, on-board fuel pump and the easy access to the fire chamber and heat exchanger, maintenance becomes very quick and easy.

Electrodes
Call Only
These electrodes are used on both the OMNI compressed air burners and EH pressure burner systems (Fits both OMNI and the Econo Heaters). Electrodes come in a set of two (2) and are located on the fuel pre-heater block assembly inside of the waste oil burner.

Fan Motor, OWH-150/350
Call Only
This fan motor fits on the backside of the waste oil heater cabinets. Compatible with both the OMNI OWH-150, OWH-350 and the Econo Heater EH-150 and EH-350 models.

Fan Motor, OWH-250/500
Call Only
This fan motor fits on the backside of the waste oil heater cabinets. Compatible with both the OMNI OWH-250, OWH-500 and the Econo Heater EH-250

Flame Cone With Ring
Call Only
The flame cone is located at the tip of the waste oil burner tube which fits in the burner tube housing around the nozzle.