Waste Oil Chiller

OMNI OWC-5 Waste Oil Chiller

5 Ton Air Chiller that cools 3000 sq. feet with the OMNI Patented Flame Control System and Ammonia Absorption Chiller Technology. Non Pro-Rated Warranty. International Voltage Available

 

Flame Control SystemOil Flow Control Supply Pump and Burner Assembly

Learn more about our Flame Control System.

Efficient Ammonia Absorption Chiller Technology

Using your waste oil as a heat source, you can use this chiller in many applications. Efficient Ammonia Absorbtion can be used for air conditioning, cooling machinery, refrigeration and more.

 
Patented Absorption Design

High Grade Stainless Steel with galvaneel sheeted cabinets for long life in outside applications.

Patented, waste oil direct fired absorption Air Conditioner Design. We successfully adapted our waste oil burner technology to the time tested and proven gas fired air conditioner design. It's performance exceeded our engineers' expectations!

Easy Cleaning

Easy Access

Lift out 3 large cabinet doors and removal of 2 securing nuts on swing out combustion chamber is all that is needed to allow easy access for occasional cleaning and service, when needed.

Minimal Ash Deposits

Dual Purpose Manifolds

When burning waste oil, timed airblasts self-clean the generator keeping ash deposit build up to a minimum, thus reducing required cleaning intervals. As a backup to waste oils, our manifolds will burn gas or propane to ensure constant cooling while performing routine cleaning.

Self Diagnosing Processing Circiut Board

Self Diagnostic Processing Circuit Board Circuit Board Diagram
Easy to Install Flexible connectors at the air handler and the air conditioner unit.
Typical Installation Air Conditioner hook up manifold
Air Conditioner hook up manifold
Chiller Connection Diagram

Model OWC-5
Performance Data: Specs
Nominal Capacity (Tons)
Standard Conditions of 95º 		5
Delivered Cooling Capacity, BTU/H 60,000
Waste Oil, BTU/H input
Gal. per hr. Consumption 		150,000
1
Chilled Water Data
Return Water Temperature ºF 55.0
Supply Water Temperature ºF 45.0
Chilled Water Flow, GPM 12.0
Allowable External Friction
Loss for Piping & Coil,
Feet of Water 		25
Unit Water Volume,
Gallons Approximate 		 
Chiller Electrical
Required Voltage, 60 Hz, Single Phase 208 / 230
Condenser Fan Motor
Full Load/Locked Rotor Amps 		1/2 hp
3.5 / 7.2
1@1/4 hp 1.0
Refrigerant Circuit Pump Motor
Full Load/Locked Rotor Amps 		 
Chiller only KW Consumption 2.15
Minimum Circuit Ampacity (MCA) 9.81
Maximum Over Current Protection (MOCP)
Field Supplied 		20 amp
Electrical Entrance Knockouts, Diameter 7/8"
Waste Oil Burner Electrical
Voltage 60 Hz (one leg)
Burner Motor 1/4 hp
Transformer amps
Oil Supply Pump Motor amps
Heater Element amps
Oil Primary Control amps
Burner amps avg.		 230V
2.2
.35
.62
2.0
.2
6.7
Burner only KW 1.25
Combine Total unit amps
Chiller with Burner		 avg. 15.5
Combine Total unit kw
Chiller with Burner		 3.41
Dimensions L/H/W 91"/51"/33.5"
Weight 930
Shipping Weight 980

 

Environmentally Sound

Join the conversion trend from conventional cooling systems - to the cost saving and environmentally safe ammonia absorption cooling process. Ammonia absorption has been a proven design since 1834. Some systems have been in operation more than 35 years without major service. Coupled with our many years of proven and advanced waste oil burning technology, makes this method of cooling a profitable choice for any waste oil generator.

Burning your waste oil on site is encouraged by the EPA, as cited in their ruling 266 of the CFR (Code of Federal Regulations). Millions of gallons of waste oil are unaccounted for every year. Our system is environmentally friendly and reduces contamination of our aquifer.

Ultimately, you will save a lot of money with this wise investment. Payback in 12-36 months depending on your cost of oil removal per gallon and existing air conditioning costs.

  • Simple direct fired technology
  • Chilled water allows:
    • Easy Installation
    • Multiple Zoning
    • Flexibility
    • No VAV controls needed
    • Multiductable
    • Fans can be used
  • No compressor or engine maintenance
  • Powered by clean, safe and abundant waste oil, gas or propane
  • Single phase power requirements opposed to 3-phase conventional A/C hook-up
  • Air cooled - no cooling towers needed
  • Low energy costs. Waste oil is FREE Demand costs will be cut by approximately 50%-70% due to greatly reduced electrical consumption
  • Eliminate ratchet charges
  • Investment Payback: 24-36 months on average.Thereafter A/C costs are approximately 50%-70% less forever
  • Inexpensive PVC chilled water piping installation to zones
Optional All Inclusive Equipment for Turn-Key Installation
  • Chilled Water Type A-Coil
    Air Handler Exchanger
  • Built In 3-Speed 3/4 HP
    Direct Drive Squirrel Cage
    Blower
  • Insulated Cabinet
  • Standard Water Pump
  • Room Thermostat
  • Water in/out Pressure
    Gauges
  • Air Purge Vent

Recycle by burning used oils for free energy
Heat - Air Conditioning - Hot Water

Enjoy years of FREE AIR CONDITIONING, low maintenance and clean waste oil burning with our patented
The OMNI Flame Control System
Exclusive with every OMNI Waste Oil Chiller

OMNI offers more at a competitive price, the best bargain, the easy choice!