20 Amp Fuse
Call Only
This fuse is located inside of the inline fuse holder and can be found between the terminal block and the power switch within the electrical box on the waste oil burner.
3/4 Rope Gasket
Call Only
3/4″ rope Gasket. This item is $5.25 per foot. Please call for details. Located on the waste oil burner side swing door and the clean out side swing door opposite of the waste oil burner on all OMNI and Econo Heater waste oil heaters.
6″ Class A Waste Oil Heater Chimney Kit
Call Only
6" Class A waste oil heater chimney kit for venting. The EH-75 and OWH-75 are the only waste oil heating units that use the 6". All other sizes and models use the 8" class a chimney kit. This is a through the roof chimney kit. Call for details.
8″ Class A Waste Oil Heater Chimney Kit
Call Only
8" Class A waste oil heater chimney kit for venting. The EH-75 and OWH-75 are the only waste oil heating units that use the 6". All other sizes and models use the 8" class a chimney kit. This is a through the roof chimney kit. Call for details.
90 Degree Fitting
Call Only
The 90 degree fitting is used to connect the fuel line from the valve solenoid to the fuel pre-heater block on the waste oil burner.
Air Band
Call Only
The air band is used on both the OMNI compressed air burner system and the Econo Heater pressure burner system. Located on the waste oil burner housing.
Air Compressor Carbon Plate
Call Only
The carbon plate is located in the air compressor motor behind the removable plate. Carbon plate is accessed the same way as the vanes.
Air Compressor Motor (OMNI line only)
Call Only
The motor air compressor is a standard build on all OMNI waste oil heaters. Located on the bottom of the waste oil burner assembly.
Air Compressor Squirell Cage
Call Only
This squirrel cage fan is located inside of the waste oil burner housing between the air-band and the air compressor motor.
