|
OMNI waste oil heaters do not requiring constant cleaning and adjustments.
Operations others would have you believe are standard
procedures.
With an OMNI you
can eliminate your normal costs of heating, avoid the
liabilities of handling, storage, and eliminate hauling costs.
On top of all of these
benefits, you can realize a full return on your investment
quickly; usually within the first 18 months. |
 |
OMNI burns
fuels from kerosene to 90W gear oil (including
synthetics). OMNI's hands-off system combines our
patented oil preheat and oil flow control to burn a
wider range of fuel than other waste oil burners,
with no adjustments. |
 |
Highest
quality heaters/boilers/air conditioners on the
market. OMNI's advanced design, high level of
quality and craftsmanship combine to make OMNI the
premier unit in the industry today. |
 |
State of
the art, solid state Oil Preheat System. OMNI's
patented system provides consistent oil temperature and
viscosity to the burner. Solid state controls allow only
a 3° variance in oil temperature. This maintains oil
viscosity and results in the most thorough, clean and
consistent burn available. Other manufacturers'
mechanical preheat systems allow large temperature
variances which cause varied fuel viscosity and
inconsistent flame in combustion chamber, resulting in
uneven heat and quicker failure of chamber. |
 |
Preheater
heats both oil and air at the same time for optimum
atomization (spray) and completeness of
burn. |
 |
Electronic
oil shut off valve eliminates nozzle drip - won't allow
stalagmite of sludge at the bottom of the
chamber. |
 |
Patented
Oil Preheat System ELIMINATES the need for
routine disassembly of your burner to scrape out carbon
build up in the oil heat block. OMNI's patented oil
preheater uses advanced technology to eliminate the need
for cleaning. Our superior design will not
carbon. OMNI is the only manufacturer that can
say this! |
 |
Built-in
air compressor. OMNI includes a built-in vane
oil-less compressor as standard equipment. Our
compressor requires no maintenance and allows the unit
to be operated 24 hours/day without an external air
supply. You eliminate the risk of destroying a shop air
compressor if an air line were to
rupture. |
 |
Long burn
path provides high efficiency and eliminates the need
for a target wall. OMNI waste oil burners are up to
85% efficient. Our long combustion chamber burn path and
oil flow control capabilities eliminate the need for a
target wall. With others, target walls are subject to
direct exposure to flame and extreme temperature changes
which destroy the target and require them to be replaced
frequently. |
 |
Stainless
steel heat exchanger is standard. OMNI waste oil furnaces
feature high grade stainless steel heat exchangers.
Stainless steel is the longest lasting, most durable
material available for high temperature applications.
Other manufacturers use lower cost materials and try to
compensate with thicker walls of inferior
steel. |
 |
Patented
Oil Flow System controls fuel by volume. OMNI's
patented flow control system regulates fuel by volume.
Conventional waste oil burners use a preset pump and
control fuel delivery with a fuel pressure regulator.
This conventional system creates variable to fuel flow
and cause over and under firing. |
 |
10 Year
Warranty. OMNI waste oil furnaces are so reliable
that they are backed by a 10 year limited warranty. 1st
5 years are under a full warranty. The remaining 5 years
are prorated on the combustion chamber and exchangers.
The oil preheater circuit board and heat block carry a
full 5 year warranty. |
 |
Swing out
burner. Allows easy access for cleaning of burner
nozzle and end cone if needed. Combustion chamber annual
clean out is easy. OMNI provides complete access to
inside of combustion chamber and heat exchangers with
the largest openings in the industry. |
 |
Full access
clean out panel. OMNI provides complete access to
the inside of heat exchanger and combustion chamber
through our full length clean out panel. Other
manufacturers provide only limited access or require
clean out of exchangers that are too small to thoroughly
reach. |